Showing posts with label Makeuptechnical. Show all posts
Showing posts with label Makeuptechnical. Show all posts

Sunday, 13 March 2016

Light Scars Using Moulds

In todays technical lesson with Sue she showed us another method in which we could create scars and cuts. These would be pre-made already using a mould and then you apply this to the skin. The process of creating the scar or cut is longer, but it takes less time to make it look as realistic because you don't have to create the actual wound. Scars and cuts made from moulds are used a lot in the film and TV industry because they are useful for continuity as you achieve the same look every time.

Creating the scar
- Melt the gelatine and then pour this into the pre-made mould
- Coat the mould in talcum powder so that the gelatine does not stick to the mould

Health and safety
When using these products it is important to be thinking about your clients health and safety at all times. For this in particular you should ensure that the client shuts their eyes if you are creating the wound near this area. Keep asking your client if they are okay and beforehand ask if they have any allergies. 

Products used
- Pros aide
- Pro clean
- Witch Hazel
- Loose powder
- Cotton buds
- Brushes
- Cotton pads
- Supra colour palette
- Blood
- Alcohol

Cut
- You can remove any jagged edges to the mould so that it looks better on the skin
- Apply glue to the back of the cut and to the skin. Wait for these to go clear before you place the mould on the skin otherwise the white colour of the wet glue will appear through the mould
- Place the mould on the skin and press firmly so that it is completely stuck to the skin
- Take the witch hazel on a cotton bud and blend the edges of the mould outwards. This will allow it to blend into the skin more. 
- Once blended apply translucent powder to this to remove any shine
- Using the supra colour palette begin adding colour to the cut.
- It is best to build up the colour, therefore start with paler reds and pinks and then gradually get darker. Apply a dark red on the cut itself so that the blood looks more realistic on top of this. 
- Ensure that you cover other areas of the skin to make it look even more realistic
 - Add blood to the mould and dab over outer areas
- To remove, use pro clean - takes glue off the skin 


Reflection
Overall, I was fairly happy with my moulded cut. I found that applying a firm pressure to the mould when first placing on the skin is very important. I thought that I was pressing down with a hard pressure however some of the mould did come away from the skin.  Thankfully I could just cut this away and it didn't effect the overall outcome.  Using the witch hazel to blend the edges worked really well on some areas. However on the areas that were thicker, the blending was not that good and made the edge visible to the eye. This was frustrating however I looked at adding more colour to this area to darken it which when completed I found to be fairly successful. I thought that the colours I used were realistic and it didn't look too fake. Adding the blood brings everything together and completes the wound. Through practicing cuts for my final design, I have found that adding a darker colour to the cut itself before hand makes the blood look better. Placing the blood not just on the cut but around it in random places adds to the realism. I really enjoyed using a mould and feel that it would be extremely useful in the industry as well as being quick for time. If I were to create more cuts again for a look I would definitely think about using a mould. If I were to complete this again I would look at adding even more varieties of colour and splattering the blood more. 

Wednesday, 24 February 2016

Dirt and Dirty Teeth

In our next special effects lesson with Sue we looked at creating dirty teeth and a dirty face or hand. She spoke to us about all the products and the health and safety rules we should follow as we would be placing some products in the mouth. Sue then demonstrated to us how to create each of these looks.

Dirty Teeth
Health and safety
- When applying the surgical spirit to the tooth to remove the product, ensure that you do not apply too much. This is not damaging but if it gets into your clients mouth it is entirely nice for them.
Products -  Cotton bud, kryolan tooth enamel (yellow and black), surgical spirit

- Ask client to lift up their top lip and make sure they do not place it back down over tooth. You can use your finger to make sure it does not touch
- Using the cotton bud wipe away any moisture on the teeth where you will be applying the product and make sure they are as dry as possible
- Dip the cotton bud in the product and place on the teeth that you want to cover
- You can black out the teeth or apply a mixture of colours. A yellow colour can give the effect of nicotine stained teeth
- To remove the product apply surgical spirit onto the tooth with a cotton bud and wipe away until all the product is removed. This will not harm your client but make sure you do not place a lot on the tooth

Dirty Hand
Products -  Fullers Earth, water, coloured sprays (kryolan), hair dryer, supra colour palette, range of brushes
- Take Fullers Earth and mix with water to create more of a paste and then apply to area of the body that you want to cover
- Dry using a hair dryer until it appears paler in colour
- Using a range of coloured sprays add them over the top to add texture and tone
- When applying colour over the fingers always bend them to make sure product goes into the cracks
- To add even more colour add colours from the kryolan supra colour palette over the top making sure to blend it in
- You can crack the product and layer over the top to give the affect of scaly skin
- Make sure to add some product on the nails and underneath so that it seems as realistic as possible



Reflection
I found the dirty teeth quite simple to do as you only had to apply product in small areas. I found out that you have to make sure the tooth is completely dry otherwise the product will not apply to the tooth as well. The black tooth worked really well and did give the illusion of a missing tooth. I found mixing the black and yellow together gave a really good effect and would look good on more than one tooth. If I were to do this again, I would apply the product on more teeth to see the full effect. I also feel that using a smaller brush would be useful as you are applying product onto a small area. 
I really enjoyed creating the dirty hand. The products we used were really effective and worked well together. I found rubbing the product and cracking it to work really well as well. Layering up the products allowed me to create texture and adding darker colours in some areas added to the realism of it. The only thing that I would struggle with if I were to incorporate this into my design would be the continuity of it. The spray was very unreliable and often came out very quickly and in varying amounts. To make sure it was the same this week I think you would have to take a range of photographs and try to get it as similar as possible. Overall, I found these products to be really effective together. I will not be using these techniques however in my final design as they do not relate to my character. I have really enjoyed learning how to complete this though as I think it is always important to learn a range of new skills.

Wednesday, 17 February 2016

Sweating, fever and tears

In our next SFX lesson, we focused on sweating and fevers. Sue showed us all the products we would be using and a range of images that we could look at. She explained to us the areas of the body we would be applying the product and achieving something that looked realistic. 

Health and safety
- Stipling sponges can be quite rough on the skin, therefore do not press down to hard otherwise you may hurt your client
- Make sure that when applying the glycerin for the sweat, that this does not fall into your clients eyes if you accidently apply to much. Asking them to shut their eyes may help just in case
- Before applying the tears ask your client if you are okay to do so. They may find it easier to apply this to themselves if they are cautious of you doing so


Fever
When someone has a fever they can often end up with a rash across their body. This will include the eyes, mouth, lips, neck and hands. 
Products - Moisturiser, alcohol, supra colour palette, stippling sponge, small brushes, latex, eyelash glue

- Using a stipling sponge apply a mixture of moisturiser/alcohol with the supra colour palette. Use reds, oranges and pinks. 
- Stiple the colour around the face focusing on the cheeks, forehead, chin and neck. 
- You can also apply the colour to the ears
- You are trying to achieve a blotchy look so ensure that you use a mixture of colours. It is often easier to blend the colours with your fingers
 - Using a small brush apply the colour to the eyes. Ensure this is placed all the way down to the lash line and under the eye. 
- It is important to keep building up the colour
- Also apply around and on the lips and ensure you use a range of colours
- You can add latex/eyelash glue to the lips to create a dry look which can be a result of dehydration. If this is the case add slight hints of blue/purple to the lips. 

Sweating
Having a fever is most likely going to cause you to sweat. This will be in areas such as your forehead, cheeks and above the lip. To intensify the sweating you can spray water on the hair. 
- Using glycerin to create the sweat, place this in the areas where you are more likely to sweat with a stippling sponge. 
- You can build up the amount depending on the intensity you desire. 




Tears
You can also create a watery eye or tears. This should be done at the last minute before they are placed in the camera.
- You can add glycerin to the tear duct of the eye to create a tear. Ensure it does fall into the persons eye. 
- To create a watery eye you can apply eye drops. Make sure you only use one set of eye drops on one person as you do not want to risk exchanging bacteria. 
- If needed, the client may apply the eye drops themselves if they do not want you to do it. 

Reflection
I thought creating this would be quite simple, however Sue made emphasis on not making it too theatrical. This was therefore at the back of my head when I was completing the look. When applying the colour I found using my fingers helped to blend a lot more. I tried to not place the colour in certain areas but across all the face and thought about areas where the colours would be darker. Next time I would try and build up the colour even more to create an even more realistic look. I found adding the glycerin as sweat really added to the whole effect. I really enjoyed completing this however it is not something relatable to my character. 

Thursday, 11 February 2016

Burns

In our lesson with Sue today she spoke to us about burns, and gave us a demonstration on creating a realistic burn that we then recreated ourselves. First of all she spoke to us about a range of burns you can get and the differences between them. 

1st degree burn
Sunburn
Isopropyl alcohol (red)

2nd degree burn
Texture 
Skin showing through 
Possibly caused by hot water on skin

3rd degree burns
Come from within (same as the others)
Blended edges 
Possibly caused by acid burn

Things to think about when creating a fake burn - 
- was it in a house? 
- Could there be soot in the skin? 
- How old is the burn? (Colourings will affect this) 
- is it infected? 

When creating the burn you will be using a product called gelatine. 
- melt the gelatine in the microwave for around 20 seconds 
- if you add glitter (metals) it cannot go back in the mircowave
- can be placed straight on the skin
- hardly anyone is allergic to it
- sometimes easier to use than latex
- adds texture

Health and safety
Health and safety is an important factor when using so many products. When using gelatine you must be aware of the temperature of this. Ensure that it has had time to cool slightly but it is still the consistency that you need. Applying a small amount to the skin and then asking the client if the temperature is okay is the best technique to use. The initial moment that the product is applied to the skin can feel hot, however it does cool very quickly. If you are creating a burn on the face, ensure that you ask your client to close their eyes in case any product gets in the eyes. It is also important to keep asking if your client is okay throughout the process.

Process and products used.
  • Heat up gelatine for 20 seconds and mix in the bowl to cool down
  • Place where you want on the skin and ensure that its not to hot when applying 
  • When on the skin lift up the product until sticky to create a textured effect
  • Then dry with a hairdryer until it's no longer sticky
  • Apply witch hazel and using a baby bud use back and forth motions to deepen it into skin. This will help to blend out the edges to make it more realistic
  • Powder over the top to remove shine
  • Stiple on colour using supra palette (red/pink/yellow)
  • Add dark colours more precisely for it to be more 3D
  • Add wound filler/blood
  • You may add Vaseline to the burn to make it shiny. 
  • Gelatine, bowl, spatula, cotton buds, witch hazel, hairdryer, translucent powder, range of brushes, supra colour palette, wound filler, Vaseline. 




Reflection
I found creating the burn really difficult. Making the burn look realistic was harder than it looked, especially achieving the correct colourings. I found making the gelatine blend in with the skin hard as it was often quite thick in some areas therefore, it was not entirely possible to blend all the way. I liked the effect that the gelatine gave and was happy with this part of the burn. Lifting up the gelatine made it look realistic and created areas that were pealing. The hardest part was the colouring. I think I made it too dark in specific areas and it was not blended as well as it could off. I think if I would have had more time then I could have made it look a lot better. I get frustrated when I can't do something that I really enjoy therefore I have to keep reminding myself that this is the first time I have completed any sfx and worked with any of these products. I was happy with my burn however I know that with practice it will become easier and look more realistic. 

Friday, 5 February 2016

Cuts and bruises

In our next lesson we looked at creating fake cuts on the face or hand and bruised eyes. Sue explained to us how all the products worked and then gave us a demonstration of a fake cut on the hand. I found it so interesting how all these products could create something so realistic on the face. With even more practice I hope to perfect both of these techniques. 

Products - fake cut
Sculpting tool
Sponges 
Brushes - larger and small
Cotton bud
Hair pin 
Hair dryer 
Wax 
Latex
Acetone
Supra colour - red/pink/orange/blue
Wound filler
Fake blood

Bruise
Kryolan bruise palette - red/green/purple/yellow
Use your finger to blend

Health and Safety
When using latex it is important to be in a well ventilated room, with the windows near you open. Latex is very strong smelling and can sometimes be very overpowering. If you are using latex near the eyes then it is important to ask your client to close them. The strength and smell of it can irritate the eyes. It is also important to test if your client is allergic to latex before you begin creating any wounds. If they are allergic the skin will turn red and become itchy. When drying the latex you will need to use a hairdryer to make the process quicker. It is important to test the heat of this on yourself first before your client. 

Fake Cut Process
  • Apply barrier cream before application of any other products
  • Apply the wax to the back of your hand and move around. This should warm the product up to make it more maneuverable when on the skin. 
  • Place the wax on the skin where you want to create the cut. Apply it in a thin layer and blend into the skin ensuring there are no harsh edges.
  • Keep layering the wax. Where you want the cut to form make sure there is more product. 
  • Using the spatula create the cut by cutting through the wax
  • Next you apply latex over the wax to ensure that it does not move on the skin. Dry this using a hairdryer until it is clear.
  • To smooth out the edges you can apply acetone using a cotton bud.
  • Next you apply the colour to the cut. Mix the supra colour with the alcohol to make the product easier to apply. Focus on using pink/red/orange/blue
  • Apply this around the cut to make it as realistic as possible. Adding a variety of colours helps to do this especially if you build it up. 
  • Using a hair pin add wound filler to the cut by pressing it in
  • Finish by adding fake blood to the cut. You can drip this around the cut or flick it using a brush. 



Fake Bruise Process
  • Take a mixture of colours from the bruising palette and apply to the back of your hand to allow you to mix. 
  • Mixing the colours together apply a purple/blue colour to the skin. It helps to look at an image of a real bruise so you can see where the difference colourings are.
  • I applied a blue/purple colour under the eye and in the corner. The best method to blend the product into the skin is to use your finger. 
  • You can add reds to the skin and also yellows and green. Ensure the colours are blended well. 


Reflection
This was the first time that I had created a fake cut using these products before. I was really pleased with my first attempt and really enjoyed creating something so realistic. I found working with the wax quite hard it was not particularly easy to move. Pressing down harder helped to move it however I did not want to her my client. I found that the hardest thing was making the cut look realistic. If I had more time I would have built up the colour on the hand and made some sections darker. Overall, I am really happy with the cut that I created . I found the bruise was simple to complete when using your finger and blending slowly. Looking at a photograph helped a lot as I was able to copy a real bruise. Next time I want to apply more colours to the eye to make it as realistic as possible. 

Wednesday, 27 January 2016

Ageing Of The Skin

In our first practical lesson with Sue, she demonstrated and explained to us how to age the face through creating wrinkles and enhancing specific colours on the face to age it. She went through health and safety points and all the products we would be using. She then demonstrated on one of the girls the ageing process that we would be doing. 

Products
Latex
Old age stipple 
Acetone
Barrier Cream
Foundation palette
Concealer palette
Kryolan supra colour palette
Illamasqua translucent powder
Range of brushes
Stippling sponges
Cotton buds
Hair Dryer

Health and Safety
  • As you are working with latex you should always test the product on a part of your clients arm to test that they are not allergic. If a reaction is not is present such as heat/itchiness, then you may use the product. 
  • Make sure you are working in a ventilated room. Keep the windows open if possible or open the doors. 
Process
  • Place a gown around your client so no product can fall on them.
  • On the area that you are applying the latex, you need to apply a barrier cream. If your client has sensitive skin then this is something you should do in particular. 
  • The latex should be placed on areas with minimal hair to make the product easier to take off and so that it works better. For example, face, hands, neck and chest.
  • When applying the latex ensure that the client keeps there eyes shut. This ensures that no product can get in the eye and the fumes from the latex are less likely to irritate. 
  • Apply latex onto area that you want to cover using a stippling sponge in dabbing motions. You need to stretch the skin using two fingers to ensure that the wrinkles form. Stretch the skin as much as you can without hurting your client. 
  • Using a hairdryer, set the first layer of latex. It will go clear when dry. Make sure you test the temperature of the hairdryer on yourself before your client. 
  • Then apply another layer of latex using the same technique and dry until clear. Try and go over the layer you have already set so that a ridge does not appear.
  • You should start to see the lines forming from the latex. You can move the skin around to enhance these. 
  • Using acetone and a cotton bud, smooth out the edges to make the latex blend in with the skin. 
  • The latex will appear shiny so applying a powder over the top with decrease this and it will appear matte. 
  • To enhance the wrinkles you can apply colour to it. When looking at making the eyes seem older you can accentuate the colours already on the skin. We looked at adding a blue/brown colour under and around the eye. By asking your client to lift up there forehead/squint there eyes/smile you will be able to see where lines naturally appear. By placing a brown/blue shade onto these and blending into the skin the wrinkles can be enhanced producing wrinkles. 
  • To remove, always use hot water. 



Reflection
Initially I thought that applying the latex was going to be the hardest part, however I actually found this quite easy and simple. The hardest part of the process was making it look as realistic as possible. With more time and practice I think adding a range of skin tone colours to the area would help. Phoebe left her make-up on so applying the latex around her foundation was difficult and the latex turned a different texture where they met. Adding a blue/brown colour around the face gave a really realistic aged face. If I were to complete the whole face using this technique I think it would look even better. I found that the colour needed blending a lot with my fingers. Overall I think all the techniques that I learnt in the lesson were effective and I would love to be able to practice them again to achieve an even more realistic look.